Servo Drives
- Brush type Servomotors
- Tachogenerators
- DC Tachogenerators With Rare Earth Magnet
- Selsyns
- Brushless Servo Motors
- Servo Drive
- Gallery
Application
To control dc brushed servomotors
SPECIAL FEATURES
- Digital Control No Drift due to Ageing/Temperature
- Power & Control stages isolated for high noise immunity Precise position Control Within one Encoder count Pulse + Direction Signal for easy Stepper like performance. Position & Velocity control from Encoder signal alone No need for additional Analog (Tacho) feedback.
- Built-in Torque Loop Control for superior performance Tuning made easy Just two Tuning Parameters for most of the applications. No Tuning presets. Parameters downloaded directly from PC
- Electronic Gearing Made simple with software selectable Pulse Multiplier.
- External Interface Made hasslefree with option cards
| Model | Rating Watts | Input volts DC | Max. Cont. Current AMPS. DC | Max. Pulse Freq. KHz | Min. Pulse Width µs | Feedback Freq. Max KHz | Enclosere |
|---|---|---|---|---|---|---|---|
| JBDS 600 | 600 | 75 | 8 | 50 | 5 µs high 5 µs high | 250 | BASE-AL Cover sheet steel Protection grade IP00 |
| JBDS 600 | 1200 | 150 | 8 | 50 | 5 µs high 5 µs high | 250 | BASE-AL Cover sheet steel Protection grade IP00 |
II PROTECTION
Against Over Voltage/ Over Temperature/ Over Travel
III INDICATION
Voltage Saturation
Torque Saturation
Excess Tracking Error Trip
IV INPUT OPTION CARDS
A Sourcing
B Sinking
C Analog +/_ 10V
V FEEDBACK
E-Encoder (for options IV A or B only)
T-Tacho (for option IV C only)
VI ORDERING CODE
MODEL OPTION CARD FEEDBACK
Example: JBDS600 AE
VII OPTIONAL ACCESSORIES
DC Power Supply
| Model | V IN | V OUT | I OUT |
|---|---|---|---|
| DCP 13 DCP 18 |
240 V 50 Hz | 75 V DC | 3 Amp 8 Amp |
| DCP 23 DCP 28 |
240 V 50 Hz | 150 V DC | 3 Amp 8 Amp |
